AudaPadWebHelp > Identifying a Vehicle Using the Universal Search Tree (UST) > Configuring Vehicle Equipment > Entering, Editing and Deleting Manual Equipment

Entering, Editing and Deleting Manual Equipment

Entering Manual Equipment

1. Click the Manual equipment tab.
2. Enter a description for the piece of equipment.
3. Enter optional information as required:

   - Select a value from the Marketability drop-down box.

   - Enter the original price.

   - Enter the number of pieces.

4. Enter the install date using the following format DD.MM.YYYY. Alternatively, click to select a date from the dynamic calendar. Click here for details of how to use the dynamic calendar.
5. Click OK.
6. Click:

   - Accept to return to the Vehicle Identification UST page with the current equipment selections.

   • Your filter selections are saved and you will notice that the system has entered the vehicle details in the Vehicle for Calculation and Vehicle for Valuation section. These details are sufficient for capturing vehicle damage, and performing an accurate vehicle damage calculation and vehicle valuation. If there are any ambiguous model options or selection conflicts, you may need to resolve these. Refer to Resolving Selection Conflicts and Ambiguous Model Options.
   • If you de-selected the AX only tickbox to identify a vehicle for a manual or phantom calculation, when you click Accept, the system will ask you to identify the closest vehicle match. Click here to read more.

     When you click Accept, the system displays the Support for manual & phantom calculation page. In this page, you must identify the vehicle you wish to use for the manual or phantom calculation. To help you, the system will search for the best match amongst the vehicles covered by Audatex.

     Phantom

     If a match is found, the system will then propose a manufacturer, model and sub-model combination. You can retain this combination or override by de-selecting the AX Codes tickbox and making new selections. When you are satisfied with the vehicle match, click Accept to return to the Vehicle Identification UST page. Notice that the calculation kind is Phantom. You can, if you wish, edit the manufacturer, model and sub-model labels.

     The system also shows which Audatex coded vehicle will be used as a reference for capturing and calculation.

     Manual

     Alternatively, you can perform a manual calculation. Click the Manual tickbox and then Accept to return to the Vehicle Identification UST page. Notice that the calculation kind is Manual and that the manufacturer, model and sub-model codes are set to 00, 00, 00. You can, if you wish, edit the manufacturer, model and sub-model labels.

   • When you click Accept, the system will check your selections against a number of rules. If there are any ambiguous model options or selection conflicts, the system will ask you to resolve these. Refer to Resolving Selection Conflicts and Ambiguous Model Options.

   - Cancel to return to the Vehicle Identification UST page without saving your equipment selections.

   - < Back to return to the filter stage. This button is not displayed if you clicked Configuration to jump directly to the configuration stage.

Editing Manual Equipment

1. Click against the manual equipment entry you wish to edit.
2. Edit values and make new selections as required.
3. Click OK.

Deleting Manual Equipment

1. Click against the manual equipment entry you wish to delete.

What do you want to do?

Select optional and technical equipment

De-select standard equipment

Move equipment

Search for equipment

Resolve a selection conflict

Resolve ambiguous model options